Radiator coupling FVRe is especially suitable for radiators with high requirements at low noise levels and with requirements for efficient energy use in, for example, ventilation. Radiator coupling FVRe coupling is available in finished lengths that fit most radiators on the market. The radiator coupling is regulated with a max limiting thermostat. The FVRe valve has an exact presetting function hidden under the stuffing box. If the thermostat is removed, the valve closes to a basic position (kv 0.05) and the energy saving function starts. If the preset kv is higher than 0.05, the temperature in the room will be lower if the thermostat is removed. The valve also goes down in energy saving mode if the temperature at the thermostat drops. The safety knob has a washer that is used to set the nominal flow and to temporarily cancel the energy saving function during adjustment. Radiator coupling FVRe can be mounted side or bottom and has a rotatable control part, which means that you can turn it outwards.
Radiator coupling FVRe can also be mounted upside down. The distributor has a shut-off under the cover.
